Hammar 151 Sideloader

Why the Hammar 151 Sideloader?

The Hammar 151 is a proven Sideloader model, designed with exceptional strength and versatility in mind. With 36, 37 or 45 tonnes lifting capacity it is the strongest heavy duty Sideloader available with CE approval. The 151 can also be equipped with more advanced lifting options, such as extendable reach cranes, top spreader handling and high cube stacking. The support legs are extending and tilting, making its positioning very versatile. An excellent quality when you have a wide range of different operations. The Hammar 151 is an all-round model, excellent for both ground level lifts and transferring to/from another chassis. It is the best choice when you want to maximize lifting capacity or require the advanced lifting options available together with the versatile support legs.

Lifting from/to ground

The Hammar 151 Sideloader lifts containers to/from the ground with maximum safety and ease. A full handling cycle takes 3-4 minutes. The versatile positioning of the support leg gives more options for handling containers where space is limited.

Transfer from/to another chassis

The Hammar 151 can transfer to/from another chassis, including rail wagons. The versatile support legs can be placed behind/in front of the companion chassis, or on top or under it. When handling a lighter load, they can also be placed vertically down.

Stacking option

The Hammar 151 can be equipped with 30 tonnes stacking capacity, enabling stacking of two High cube (9’ 6”) containers. Two extra support legs are mounted on the non-lifting side for extra stability and safety.

Versatile support legs

The support legs of the 151 model are extendable and tilting. They have up to 1.9 meters outreach when placed on ground level and can tilt to stand vertically (with reduced lifting capacity). This allows multiple different support positions, enabling the 151 to handle almost any situation with ease.

Hammar 151 chassis options

When buying a Hammar Sideloader you always get a high quality Hammar designed chassis, optimized and made for Sideloader operations. We have a number of models to fulfil our customers’ requirements, which are then adapted to suit local regulations and the customer’s needs.

Fixed Chassis/Sliding Cranes - 151 S

The S-chassis is a fixed length, and has sliding cranes meaning it can handle multiple container sizes. It has a straight forward design and the lowest tare weight of all Hammar chassis. It is the most common model used world-wide. Also available with fixed cranes for single size containers upon request.

Hammar 151 options & accessories

Lifting

Choose what, when and how you can lift with your Hammar Sideloader.

Show all

2x20' capacity

A centre container beam with 4 twist locks is mounted. With the 2 twin-locks (joiners) included you can connect and lift 2 lightly loaded 20' containers simultaneously. Heavier can be transported.

Extendable cranes

Equip the cranes with extendable over arms. Choose the short, medium or MegaReach model. The MegaReach can stack two empty containers in the 2nd row.

Top spreader

Available in two versions for two purposes: 1) Handling containers in the top corner castings & faster handling. 2) Handling swap body containers or other similar cargo.

Dangerous goods

The Hammar is equipped and adapted for handling of dangerous goods according to local regulations.

Composite foot plates

Two foot plates of recycled composite material. Placed under the support legs or trailer landing legs, they drastically reduce the ground pressure. Comes with storage brackets on the Hammarlift.

Stacking capacity

Equip your Hammarlift with the capacity to stack two containers high, from ground level. N/A for model 130 and 140.

StepOver leg

Replace one of the support legs to the StepOver leg. Improves transfer operations, stability and ground pressure, while retaining the benefits of the other support leg. Available on model 195 and 151.

Optimisation

Make operations and maintenance smoother and more efficient

Show all

Automatic container twist locks

Automatic crane twist locks for more efficient operations and less room for human error. Connected to automatically open/close when the crane power is engaged/disengaged.

Hammar Optical positioning equipment

“HOPE” - Optical sensors reading the position of a container next to the Sideloader when lining up, alerting with a green light when cranes are in correct position for lifting. Increases efficiency.

Toolbox

Alloy toolbox mounted on the non-lifting side of the Hammar Sideloader.

Lifting axle

Lifting one axle when driving with less load. Saves greatly on tyre wear. Lowers automatically when maximum legal load is reached on the other axles.

Safety

Increase safety for operations, the Sideloader and staff.

Show all

Radio remote control

Cordless radio remote for all Hammar functions. The operator can control the lifting from any position outside the hazard zone, increasing usability, efficiency and safety. Choose a 1 or 2 hand unit.

Reverse camera/sensor

A camera or reverse sensor is installed in the rear of the Hammarlift. Increases efficiency, usability, safety and prevents damages.

Extra lights

Equip the Hammar Sideloader with extra LED lights for safer and more efficient operations with limited daylight. E.g. illumination of twist locks, extra reverse lights, or extra warning lights etc.

LightWeight

Reduce your tare weight, increase your payload and reduce wear and fuel consumption.

Show all

LightWeight Chassi

Optimized chassis structure and materials reduces the tare weight by 270-470 kgs depending on model. Available with alloy landing legs & carbon fender brackets. Available for chassis model S and C.

Aluminium rims

Aluminium rims reduces tare weight by 100-200 kg, while giving better heat distrubution, longer lifetime for tyres, brakes etc. and lowered fuel consumption. Gives a sleek and polished finish.

Styling

Personalize the look and style of your Hammar Sideloader. Your advertising on the road.

Show all

Painting options

Choose from a number of painting options. Colors of chassis and cranes. What type of paint, Hammar standard, metallic, clear coating or with zinc primer.

Aluminium rims

Aluminium rims gives a sleek and polished finish. Also reduces tare weight by 100-200 kg, while giving heat distrubution, longer life time for tyres, brakes etc. and lowered fuel consumption.

Stainless steel light bar

A high polished stainless steel light bar, with round LED lights. Gives a sleek and high-end look.

Advertisement plate

Personalize your Hammar with advertisement plates mounted on the sideguards or at the back crane of the 195 model. Choose color, graphics, text etc according to your needs.

Mudguards

Choose from standard mud guards and full width mud guards. Available with custom prints as option.

Power Source

Choose how to power your Hammarlift.

Show all

Truck Hydraulics

Mount or use an existing hydraulic pump & power take-off on your truck and use the truck to power the Hammar. Significantly less tare weight and maintenance costs compared to a power pack.

Power Pack

Power the Hammar by mounting a separate engine on the chassis. Makes the unit powered independently of any truck.

Hammar 151

Why the Hammar 151 Sideloader?

Hammar 151 chassis options

Chassi adaptions

Let us help you find the right Sideloader for your needs

Image Gallery

Hammar 151 options & accessories

Lifting

Optimisation

Safety

LightWeight

Styling

Power Source

Explore our other Sideloader models