A centre container beam with 4 twist locks is mounted. With the 2 twin-locks (joiners) included you can connect and lift 2 lightly loaded 20' containers simultaneously. Heavier can be transported.
Equip the cranes with extendable over arms. Choose the short, medium or MegaReach model. The MegaReach can stack two empty containers in the 2nd row. Extendable over arms is N/A on all models.
Available in two versions for two purposes: 1) Handling containers in the top corner castings & faster handling. 2) Handling swap body containers or other similar cargo. N/A on all models.
The Hammar is equipped and adapted for handling of dangerous goods according to local regulations.
There are two different weighing systems; a load indicator system with an accuracy of ± 400 kg and/or a SOLAS certified scale with an accuracy down to ±50 with optional printer.
Composite foot plates
Two foot plates of recycled composite material. Placed under the support legs or trailer landing legs, they drastically reduce the ground pressure. Comes with storage brackets on the Hammarlift.
Equip your Hammarlift with the capacity to stack two containers high, from ground level. N/A for model 130 and 140.
Replace one of the support legs to the StepOver leg. Improves transfer operations, stability and ground pressure, while retaining the benefits of the other support leg. Available on model 195 and 151.
Replace one of the support legs to the extending and tilting precision leg. Improves versatility while retaining the operation benefits of the other support leg. Available for model 110 and 155.
Automatic container twist locks
Automatic crane twist locks for more efficient operations and less room for human error. Connected to automatically open/close when the crane power is engaged/disengaged.
Hammar Optical positioning equipment
“HOPE” - Optical sensors reading the position of a container next to the Sideloader when lining up, alerting with a green light when cranes are in correct position for lifting. Increases efficiency.
Alloy toolbox mounted on the non-lifting side of the Hammar Sideloader.
Lifting one axle when driving with less load. Saves greatly on tyre wear. Lowers automatically when maximum legal load is reached on the other axles.
Radio remote control
Cordless radio remote for all Hammar functions. The operator can control the lifting from any position outside the hazard zone, increasing usability, efficiency and safety. Choose a 1 or 2 hand unit.
A camera or reverse sensor is installed in the rear of the Hammarlift. Increases efficiency, usability, safety and prevents damages.
Equip the Hammar Sideloader with extra LED lights for safer and more efficient operations with limited daylight. E.g. illumination of twist locks, extra reverse lights, or extra warning lights etc.
Reduce your tare weight, increase your payload and reduce wear and fuel consumption.
Optimized chassis structure and materials reduces the tare weight by 270-470 kgs depending on model. Available with alloy landing legs & carbon fender brackets. Available for chassis model S and C.
Aluminium rims reduces tare weight by 100-200 kg, while giving better heat distrubution, longer lifetime for tyres, brakes etc. and lowered fuel consumption. Gives a sleek and polished finish.
Personalize the look and style of your Hammar Sideloader. Your advertising on the road.
Choose from a number of painting options. Colors of chassis and cranes. What type of paint, Hammar standard, metallic, clear coating or with zinc primer.
Aluminium rims gives a sleek and polished finish. Also reduces tare weight by 100-200 kg, while giving heat distrubution, longer life time for tyres, brakes etc. and lowered fuel consumption.
Stainless steel light bar
A high polished stainless steel light bar, with round LED lights. Gives a sleek and high-end look.
Personalize your Hammar with advertisement plates mounted on the sideguards or at the back crane of the 195 model. Choose color, graphics, text etc according to your needs.
Choose from standard mud guards and full width mud guards. Available with custom prints as option.
Mount or use an existing hydraulic pump & power take-off on your truck and use the truck to power the Hammar. Significantly less tare weight and maintenance costs compared to a power pack.
Power the Hammar by mounting a separate engine on the chassis. Makes the unit powered independently of any truck.