40 tonnes Safe Working Load (SWL).
The Hammar 119 is a highly adaptable Sideloader, combining the strengths of two different support leg types into a single, versatile solution. The model offers one of the best transfer capabilities as well as stacking capacity. With a lifting capacity of 40 tonnes (SWL) that can easily handle any loaded shipping container.
The front support leg, with its StepOver Mode, allows easy, fast and smooth container transfers from another chassis while also giving high stability for ground-to-ground lifts. Meanwhile, the rear tilting telescopic support leg provide added flexibility in its positioning. Coupled with its stacking capabilities, the Hammar 119 delivers a powerful combination of versatility and efficient transfer performance.
Lifting from/to ground level
The Hammar 119 Sideloader can safely and easily lift a fully loaded shipping container to/from the ground level. Deploying the stabilizers, attaching/removing the container hooks and lifting the container only takes approximately 3,5 minutes.
Transfer from/to another chassis
During transfer operations, the front support leg extends over and next to the companion chassis without making contact, creating a “tunnel”. This saves time for trailer transfers, as they can move in or out of the lifting zone while the support legs are deployed. The rear support leg is typically placed behind the companion chassis but can also rest on top of many chassis models if needed. The Hammar 119 can also work well for transferring from railway wagons.
Stacking capacity
The Hammar 119 is equipped with stacking capability, allowing two High-Cube containers to be stacked at ground level. This can help save space, enable you to handle more varied tasks and offer a wider range of services.
Modes of operation
The front support leg has an additional 2 modes of operation. The Sledge Mode (see image) has a quicker deployment time and requires significantly less space, while the Dock Mode requires similar space but has more flexible positioning.
When buying a Hammar Sideloader you always get a high quality Hammar designed chassis, optimized and made for Sideloader operations. We have a number of models to fulfil our customers’ requirements, which are then adapted to suit local regulations and the customer’s needs.
Fixed Chassis, Sliding Cranes - 119 HS
The S-chassis is a fixed length, and has sliding cranes meaning it can handle multiple container sizes. It has a straight forward design and the lowest tare weight of all Hammar chassis. It is the most common model used world-wide. Also available with fixed cranes for single size containers upon request.
Contact us today!
Axle configurations
We offer different axle configurations to your Hammar chassis; different numbers of axles, optimized weight distribution and more. All conforming to local regulations and your needs.
Gooseneck chassis
Our trailer chassis models can be built as a gooseneck chassis. A gooseneck chassis is designed to transport 40'+ High Cube containers in countries with low overall height restrictions. Max 36 tonnes lifting capacity.
Road train options
A Hammar chassis can be built with a 5th wheel/turntable or a drawbar coupling for towing another semi-trailer or trailer behind. This allows you to have a road train that you can load and unload with the Sideloader.
Low bed chassis
A Hammar trailer chassis can be built as a low bed chassis, giving a significantly lower overall height when loaded. Excellent for extra high loads or other situations that restrict the height of the vehicle.
Choose what, when and how you can lift with your Hammar Sideloader.
2x20' capacity
A centre container beam with 4 twist locks is mounted. With the 2 twin-locks (joiners) included you can connect and lift 2 lightly loaded 20' containers simultaneously. Heavier can be transported.
Dangerous goods
The Hammar is equipped and adapted for handling of dangerous goods according to local regulations.
Composite foot plates
Two foot plates of recycled composite material. Placed under the support legs or trailer landing legs, they drastically reduce the ground pressure. Comes with storage brackets on the Hammarlift.
Make operations and maintenance smoother and more efficient
Automatic container twist locks
Automatic crane twist locks for more efficient operations and less room for human error. Connected to automatically open/close when the crane power is engaged/disengaged.
Hammar Optical positioning equipment
“HOPE” - Optical sensors reading the position of a container next to the Sideloader when lining up, alerting with a green light when cranes are in correct position for lifting. Increases efficiency.
Toolbox
Alloy toolbox mounted on the non-lifting side of the Hammar Sideloader.
Lifting axle
Lifting one axle when driving with less load. Saves greatly on tyre wear. Lowers automatically when maximum legal load is reached on the other axles.
Increase safety for operations, the Sideloader and staff.
Radio remote control
Cordless radio remote for all Hammar functions. The operator can control the lifting from any position outside the hazard zone, increasing usability, efficiency and safety. Choose a 1 or 2 hand unit.
Reverse camera/sensor
A camera or reverse sensor is installed in the rear of the Hammarlift. Increases efficiency, usability, safety and prevents damages.
Extra lights
Equip the Hammar Sideloader with extra LED lights for safer and more efficient operations with limited daylight. E.g. illumination of twist locks, extra reverse lights, or extra warning lights etc.
Reduce your tare weight, increase your payload and reduce wear and fuel consumption.
Aluminium rims
Aluminium rims reduces tare weight by 100-200 kg, while giving better heat distrubution, longer lifetime for tyres, brakes etc. and lowered fuel consumption. Gives a sleek and polished finish.
Personalize the look and style of your Hammar Sideloader. Your advertising on the road.
Painting options
Choose from a number of painting options. Colors of chassis and cranes. What type of paint, Hammar standard, metallic, clear coating or with zinc primer.
Aluminium rims
Aluminium rims gives a sleek and polished finish. Also reduces tare weight by 100-200 kg, while giving heat distrubution, longer life time for tyres, brakes etc. and lowered fuel consumption.
Stainless steel light bar
A high polished stainless steel light bar, with round LED lights. Gives a sleek and high-end look.
Advertisement plate
Personalize your Hammar with advertisement plates mounted on the sideguards or at the back crane of the 195 model. Choose color, graphics, text etc according to your needs.
Mudguards
Choose from standard mud guards and full width mud guards. Available with custom prints as option.
Choose how to power your Hammarlift.
Truck Hydraulics
Mount or use an existing hydraulic pump & power take-off on your truck and use the truck to power the Hammar. Significantly less tare weight and maintenance costs compared to a power pack.
Diesel Power Pack
Power the Hammar by mounting a separate engine on the chassis. Makes the unit powered independently of any truck.
Electric Power Pack
Electric power with zero emmision, lower operating costs and lower noise levels. Can be charged by the truck while driving and by plug-in.